Blistered Trucks 34mm

Blistered Trucks are professional fingerboard trucks designed from scratch! It was a big and expensive project to undertake and involved some real personal sacrifices but the end result was absolutely worth it! They are beautiful with great performance and a tough beefy look to them. Made out of durable metals and fitted with our own custom made bushings and pivot cups.

These trucks currently only include inverted kingpins, we will have more standard conversion kits available in the future.

Compared to other trucks, Blistered trucks are in-between the wheelbase length of BRTs versus Dynamics (shorter wheelbase of BRT makes for a lower pop, longer wheelbase of Dynamic makes for a higher pop, ours are right in the middle!)

Blistered Trucks work with any single bearing wheels that have a bearing lock mechanism. Any wheels that you'd use with other professional fingerboard trucks will work perfectly on these trucks!

Installation instructions: If pivot cup is loose in package, install it from the bottom of the baseplate before mounting to deck. For inverted kingpin, use the thicker black kingpin screw. For standard conversion, use the thinner kingpin screw with the nut, put the screw in from the bottom of the kingpin and use two tools, one to hold the screw in the bottom and one to tighten the nut at the top, with standard conversion you have to adjust tightness with the trucks taken off of the board, which is just how it has to be so that one truck can feature both options. Risers are also included for free, but may require longer screws or deeper countersink holes in the board.

*Note: We have changed the name to 33mm, these are the same hangars as before. We measured them and found out they've been 33 the whole time. They will fit nicely on decks that are 33 or 34mm!